AirMaks Arms Krait owners speak up

[scubajeeper]

I’m partial to Eastern European guns, the Krait checks all the boxes for me but it has had reg issues that I believe have been corrected. How do you like yours? Any information would be greatly appreciated.

Thanks, Mike

 

[pjclarke]

Love mine in .22. I have several videos on my channel, Wisconsin AirGunners, on both the Standard (shorty) and the L.
This went live yesterday.

 

[MikeVV]

I've got a compact version, in .22 cal.
I waited until AirMaks made their first adjuster change to buy one. Don't know, maybe lucky...but my little .22 Krait is doing very nicely thank you. I even put a digital gauge in the post regulator position to keep a better accurate check on how the regulator is working.

Zero complaints. As with most air guns, the first shot after sitting a few weeks+, is maybe 15 to 18 bar (very little !!) low. But after the first shot, and on, everything as it's supposed to be.

Again, no complaints from me.

Mike

 

[Scott.t]

I have the krait X in .25 cal. Previous owner swapped out the factory reg with a Huma reg. It’s a great shooting gun. I have it tuned for shooting the jsb 34gr pellets at 70 fpe, I got 84 shots on a fill at this power level. It’s e trembly accurate with those pellets and 2 different slugs I’ve tried in it so far. It’s much lighter than I anticipated, feels great and very smooth.

 

[Mike_Lenardon]

I've had mine for about 13 months now. The first one that I got was garbage, the second one is rock solid. Been shooting the same since I set it up. Bought a Huma reg just in case and it's still in the box. Fun little gun, quiet, accurate and easy to shoulder.

 

[Loff]

I have had mine (KRAIT L, in .177) almost a week. By the look an description I have Huma MK3 regulator fitted from factory.
Because I'm waiting for the scope for Krait, i have not tried accuracy yet. But have taken maybe 10 dry shots and reg. is spot on at 70 bar (factory setting). No creep.

My regulator and screenshots of AirMaks Arms instructions on how to set MK3 and MK4 regulators pressure. See the difference on appearance of regulators MK3 and MK4 to define witch You might have.

Link to AirMaks Arms manuals --> https://www.airmaksarms.com/caiman-manuals

 

[Pfddi]

I took my Krait L 25 out last week to the range - almost straight out of the box. Filled it to 265bar. The regulator came set at about 101. I used JTS 25.39 pellets. I took my time between shots as I was zeroing in a new scope on it. When I was finished, the tank gauge showed about 171 bar. So far, I'm very impressed. The accuracy is very good. I did a 50 yard group of 10 inside a quarter rather easily. I didn't touch the hammer tension at all. I need to adjust the trigger some as it's a bit higher on pressure than I like. Used an FX Chrony. The second shot @ 807 was there because I didn't close the bolt all the way and threw off the numbers (air blew back at the magazine)! The reg has not dropped as of today (4 days now) and I will take it out again today and do another string of shots.

Shot count: 26
Low: 807 FPS
Hi: 930 FPS
Avg: 917 FPS
Spread: 123 FPS
STD Dev: 22.7 FPS

25-Jan-2024 15:00:31,916,FPS,47.3,FT Lbs,
25-Jan-2024 15:01:45,807,FPS,36.8,FT Lbs,
25-Jan-2024 15:02:08,930,FPS,48.8,FT Lbs,
25-Jan-2024 15:06:00,916,FPS,47.3,FT Lbs,
25-Jan-2024 15:06:10,928,FPS,48.6,FT Lbs,
25-Jan-2024 15:07:12,914,FPS,47.1,FT Lbs,
25-Jan-2024 15:07:23,930,FPS,48.8,FT Lbs,
25-Jan-2024 15:08:25,912,FPS,46.9,FT Lbs,
25-Jan-2024 15:08:34,928,FPS,48.6,FT Lbs,
25-Jan-2024 15:08:43,926,FPS,48.3,FT Lbs,
25-Jan-2024 15:08:55,930,FPS,48.8,FT Lbs,
25-Jan-2024 15:09:03,919,FPS,47.6,FT Lbs,
25-Jan-2024 15:11:58,914,FPS,47.1,FT Lbs,
25-Jan-2024 15:13:44,923,FPS,48.1,FT Lbs,
25-Jan-2024 15:13:51,919,FPS,47.6,FT Lbs,
25-Jan-2024 15:13:59,926,FPS,48.3,FT Lbs,
25-Jan-2024 15:14:07,928,FPS,48.6,FT Lbs,
25-Jan-2024 15:14:31,919,FPS,47.6,FT Lbs,
25-Jan-2024 15:14:38,923,FPS,48.1,FT Lbs,
25-Jan-2024 15:14:47,921,FPS,47.8,FT Lbs,
25-Jan-2024 15:14:54,921,FPS,47.8,FT Lbs,
25-Jan-2024 15:15:02,921,FPS,47.8,FT Lbs,
25-Jan-2024 15:15:10,919,FPS,47.6,FT Lbs,
25-Jan-2024 15:15:18,921,FPS,47.8,FT Lbs,
25-Jan-2024 15:15:28,914,FPS,47.1,FT Lbs,
25-Jan-2024 15:15:37,916,FPS,47.3,FT Lbs,

 

[Wipeout65]

I just sent one back, Krait L in .22 Mk 4 reg. pressures all over the place, reg goes between 110 and 130 bar, constantly had to increase hammer tension after a fill as fps would drop by 300.
Should be rebranded as the Crate.