Karma Karma Red Panda Bench Model

[zx10wall]

Uhm……This PCP is a different animal y’all. I’m actually astonished at the build quality. The massive chrome moly Bull Barrel is impressive. Testing to begin soon……….

Created: 05/16/24 07:37 AM
Description: .30 RP
Notes 1:
Notes 2:
Distance to Chrono(FT): 1.00
Ballistic Coefficient: 0.065
Bullet Weight(gr): 50.50
Temp: N/A °F
BP: N/A inHg
Altitude: 150.00
# FPS FT-LBS PF
12 940 99.10 47.47
11 938 98.68 47.37
10 942 99.52 47.57
9 943 99.73 47.62
8 941 99.31 47.52
7 941 99.31 47.52
6 940 99.10 47.47
5 941 99.31 47.52
4 940 99.10 47.47
3 942 99.52 47.57
2 944 99.94 47.67
1 943 99.73 47.62
Average: 941.2 FPS
SD: 1.7 FPS
Min: 938 FPS
Max: 944 FPS
Spread: 6 FPS
Shot/sec: 0.1
True MV: 942 FPS

 

[rodjava]

Nice, 1st upgrade would be a better hard case!

 

[Trucker3573]

Typically how do 50 gr pellets perform at 940 fps ? Seems a little hot especially for the utmost precise accuracy at 100 yards.
Don’t most guys shoot them a bit slower ?

 

[zx10wall]

Typically how do 50 gr pellets perform at 940 fps ? Seems a little hot especially for the utmost precise accuracy at 100 yards.
Don’t most guys shoot them a bit slower ?

It may seem hot being we've all been told that. Thayne won the Triple Crown shooting faster

Also, this is not JSB 50s...........

 

[zx10wall]

Nice, 1st upgrade would be a better hard case!

No doubt, the end user has to upgrade their case. You need a hefty robust case for this 17.8 lb. brute!!

 

[Centercut]

No doubt, the end user has to upgrade their case. You need a hefty robust case for this 17.8 lb. brute!!

Yes, it appears to be a quality build, and sending it in a cheapo case and using 50 cent gauges seem to be out of place...

Very good numbers at 99 FPE. Let us know the shot count from 250 bar at that power level. I would assume it shoots more accurately at that speed, since if it was just as accurate at say 880 fps, there would be no good reason to shoot it at 940/950.

If you shoot it in EFT at 99 FPE, it's going to PUNISH those targets!

Is that an STO (Silent Thunder Ordnance) Falx High Flow moderator on that gun? Love those...

Is that barrel inner photo after you have cleaned the barrel?

 

[Dairyboy]

That thing is a beast. Can't wait to see what it'll do!

 

[nomojo65]

Hopefully the trigger can be adjusted to at least 1lb or lower?

 

[Dairyboy]

Hopefully the trigger can be adjusted to at least 1lb or lower?

In his photo is shows 3oz on the Lyman

 

[nomojo65]

Oops your right, my bad!

 

[Perle]

Bravo AEA !

 

[zx10wall]

Some Wika gauges installed and swapped lever for my Southpaw shooting

 

[bfloyd1095]

Yes, it appears to be a quality build, and sending it in a cheapo case and using 50 cent gauges seem to be out of place...

I was thinking the same thing...

You would have thought they would spend a few more bucks and install a decent set of gauges consider9ng the sales price of the gun ...

As the saying goes "You can take the girl out of the trailer park, but you can't take the trailer park out of the girl" .... the chinese influence of this gun make this a relative statement...

 

[Perle]

sounds like you have some experience with trailer park girls !!

 

[Perle]

i prefer

" you give a girl the HOPE diamond and she compalins about the weight"

 

[nomojo65]

How’s that heavy barrel attached? Threaded?

 

[zx10wall]

Hopefully the trigger can be adjusted to at least 1lb or lower?

Mine is adjusted to 3.5 ounces.

 

[zx10wall]

How’s that heavy barrel attached? Threaded?

Very tight tolerances and set screw fasteners.

It also has radial transfer porting X6.

 

[zx10wall]

As the saying goes "You can take the girl out of the trailer park, but you can't take the trailer park out of the girl" .... the chinese influence of this gun make this a relative statement...

I can guarantee you that if it said made in Germany on this RP, no one would question it. The machining and quality of build is high level.

 

[zx10wall]

Yes, it appears to be a quality build, and sending it in a cheapo case and using 50 cent gauges seem to be out of place...

Very good numbers at 99 FPE. Let us know the shot count from 250 bar at that power level. I would assume it shoots more accurately at that speed, since if it was just as accurate at say 880 fps, there would be no good reason to shoot it at 940/950.

If you shoot it in EFT at 99 FPE, it's going to PUNISH those targets!

Is that an STO (Silent Thunder Ordnance) Falx High Flow moderator on that gun? Love those...

Is that barrel inner photo after you have cleaned the barrel?

The barrel I.D. photo was before cleaning. Looks like BSA old style smooth rounded lands. Yes, STO Falx - M18X1. STO should sponsor Team Centercut, lol.

I’ll try slowish and fast. The RP is very easy to tune.