JSB Knock Out Slug .22

[LMIT]

Hi

Anyone knows what drag to use in Strelok Pro for this Slug pellet ?

JSB Knock Out (216) 25.39Gr Cal .22

JSB Knock Out (217) 25.39Gr Cal .22

//LMIT

 

[2manyAirGunz]

"The G1 model is most often used for calculating the BC of slugs..."

https://hardairmagazine.com/ham-columns/drag-coefficient-and-ballistics-coefficient-explained/

 

[Dankleinman]

I'm not trying to hijack your post but I have a question . Where can you find any of the knockout slugs in the USA 



Thanks 



Dan 

 

[Elis5173]

Krale has them. Shipping might take some time with everything going on in the world today.

https://www.krale.shop/en/airgun-slugs-jsb-knock-out-5-5-mm-25-39-grain/

 

[TrinityMaker]

Not sure why anyone in the US would order the JSB Knock Out slugs in .217 diameter. NSA, AVS, Griffin, and Varmint Knockers ALL make .217 slugs in varying weights that are readily available in the US. I can understand wanting the .2165 JSB's, but not the .217. I understand the FX slugs as well, because they have a revolutionary hollow point design with a huge cavity for expansion that also cuts down on weight. But the JSB's are just hollow point slugs similar to the ones available here in the US already.

Since JSB's are manufactured in the Czech republic, I see the appeal of them in the European market. I'm sure having NSA's shipped from the US isn't cheap. But I wouldn't hold my breath that they will be superior to the similarly sized slugs that are already available here in the US. If you want to buy some just to try them, then knock yourself out. But I'm not anticipating any huge improvements over what's already available. 

Just my $.02

 

[mercado]

I received today a tin of the 216...to try on my regulated talon ...hope they do great 

 

[Spray1Mark]

Not sure why anyone in the US would order the JSB Knock Out slugs in .217 diameter. NSA, AVS, Griffin, and Varmint Knockers ALL make .217 slugs in varying weights that are readily available in the US. I can understand wanting the .2165 JSB's, but not the .217. I understand the FX slugs as well, because they have a revolutionary hollow point design with a huge cavity for expansion that also cuts down on weight. But the JSB's are just hollow point slugs similar to the ones available here in the US already.

Since JSB's are manufactured in the Czech republic, I see the appeal of them in the European market. I'm sure having NSA's shipped from the US isn't cheap. But I wouldn't hold my breath that they will be superior to the similarly sized slugs that are already available here in the US. If you want to buy some just to try them, then knock yourself out. But I'm not anticipating any huge improvements over what's already available. 

Just my $.02

Because they work well in almost everything, this is defintely not the case with any other make!

 

[mercado]

As I spected I bump the power to shoot them at 930 out of my regulated talon 18" barrel hole in hole at 50y ... perfect size for my airforce barrels..