John in PA
- Thread starter Skip-in-WV
- Start date
Just to add on, excellent guy. Rebuilt my Fwb124. Great communication, sent picturesque he went, and great work. It is the smoothest cocking and shooting springer I’ve ever had
Upvote 0
G
Guest
Guest
I have a 20 cal Diana 34 and a 177 cal Diana 38 with him now. Both rare and a bit unusual, but I certainly trust him for his work.
Mitch
Mitch
Upvote 0
G
Guest
Guest
plus one
I've had three rifles tuned by John. A Diana Model 36, a Model 48, and a D460. There is a thread here somewhere that I listed what he does when he tunes a rifle. Suffice it to say he is an exceptional gun/air smith. All three will pass the ten dimes challenge. Here are videos of the 48 and 460 at work after the tuning.
vvvv WARNING HUNTING VIDEO vvvv
Model 48 Squirrel
https://www.youtube.com/watch?v=e9yei24jslI&t=0s
^^^^ WARNING HUNTING VIDEO ^^^^
D460
150 yard golf ball
https://www.youtube.com/watch?v=2yv_PlMMpA4
I have the barrel of the Model 36 in to him now. He is going to cut it back to 13", re-choke and re-crown then thread for a moderator/muzzle break. I've also told him if he wants to make a muzzle break for it rather than pulling one of the shelf I'll pay for that as well.
I've had three rifles tuned by John. A Diana Model 36, a Model 48, and a D460. There is a thread here somewhere that I listed what he does when he tunes a rifle. Suffice it to say he is an exceptional gun/air smith. All three will pass the ten dimes challenge. Here are videos of the 48 and 460 at work after the tuning.
vvvv WARNING HUNTING VIDEO vvvv
Model 48 Squirrel
https://www.youtube.com/watch?v=e9yei24jslI&t=0s
^^^^ WARNING HUNTING VIDEO ^^^^
D460
150 yard golf ball
https://www.youtube.com/watch?v=2yv_PlMMpA4
I have the barrel of the Model 36 in to him now. He is going to cut it back to 13", re-choke and re-crown then thread for a moderator/muzzle break. I've also told him if he wants to make a muzzle break for it rather than pulling one of the shelf I'll pay for that as well.
Upvote 0
John put a Vortek kit in a .177 HW50 for me and cut the barrel back to 12” threaded w/a Donny fl tanto. Shoots awesome. Great work and fantastic guy to deal with.
Zeke
Zeke
Upvote 0