Jet 1 and 2
- Thread starter Perle
- Start date
Mine lost a bit of air on bleed twice during the first few fills. It's been solid since.
A Tatsu quiets it down nicely, not sure why a Tanto wouldn't? The POI shift was enough that I settled for 1/4 of a Kleenex stuffed in each ear while in the backyard. I don't mind the crack in the field, very useful for dissuading packs of wild dogs.
A Tatsu quiets it down nicely, not sure why a Tanto wouldn't? The POI shift was enough that I settled for 1/4 of a Kleenex stuffed in each ear while in the backyard. I don't mind the crack in the field, very useful for dissuading packs of wild dogs.
Upvote 0
I know its a capt obvious answer but be sure you’ve lubed your probes O rings
Both my Krals did that and it was dry Turkish o r rings on the probe
Both my Krals did that and it was dry Turkish o r rings on the probe
Upvote 0
I'm looking for a compact pistol or bullpup for pesting. Would the Jet I or II fit that bill for me? I would like to kill something larger, such as a hog, so I'm thinking a .25 or .30.
Upvote 0
It'll ring your ears, for sure. Tanto did quiet it down to a tolerable level, but I can't speak for accuracy as I've not yet gone beyond 10 yards with it. This is two full mags of 27.8 grain Benjamin domes, on the 25 cal Jet 1:
Upvote 0
Hi, folks. I put a Buck Rail standard threaded suppressor on my new Jet2 25cal. This suppressor makes a huge difference. About as loud as 22cal co2 rifle. My opinion is if a gun is used for defense (bear in the garbage bin) then the louder the better to scare whatever. Bright lights, loud noise works.
Upvote 0
I'm new here and just ordered a Jet 1. What do I need to suppress the loud report that I read about ? I'm thinking about Bucktail. What model and do I need a adapter to mount to my Jet's barrel ?
Upvote 0
The mod needs to be 1/2 x 20 UNF Bolt, that's the adapter threading.
Here is an example.
buck-rail.com
This one is less expensive. The one I got was defective but they are sending me a new one. That means everything to me.
https://airguncapital.com/products/1-2-20-unf-silencer?variant=40988989063220
Here is an example.
1/2-20 UNF Suppressor
1/2-20 UNF Suppressor Designed to be compatible with 1/2-20 UNF male threads Choose from .177/.22, .25, or .30 caliber and with or without taper 3d printed in Polycarbonate plastic in the US by a v…
buck-rail.com This one is less expensive. The one I got was defective but they are sending me a new one. That means everything to me.
https://airguncapital.com/products/1-2-20-unf-silencer?variant=40988989063220
Upvote 0
I have the Buck rail square profile threaded moderator on my Jet2 25cal.. Amazing difference.
Upvote 0
The Jet comes with a male 1/2 20 adaptor already ? That doesn’t sound right
It has female threads for an adaptor to my knowledge but needs an adaptor
Upvote 0
Bought mine Jet2 25cal new from Kittery Trading Post 2 weeks ago for $239- free shipping. It came with the adapter.
Upvote 0