Is there a QD mount for the DNT TNC225R ?

[JHL]

Is there an affordable QD mount for the DNT TNC225R? I like to be able to swap the TNC225R for my other scope without having the need to have an allen key with me and to re-zero the scope every toime I swap.
I have another scope with a 30mm tubeand it is easy enought to find a QD mount. This means I will have to buy a QD mount for my TNC225R and one for my "normall" scope with 30mm tube. Does anybody know an affordable QD mount for the TNC and one affordable for my "regular"scope with 30mm tube?
I will have to buy one of eacht to be able to swap scopes.
(NB. I have seen QD mounts with pricetag of over 400 euros, this is a little to expensive for me at the moment).

 

[iFish]

DNT has one. This is the US based website. There may be one based where you are. Not sure, but Go here

https://us.dntoptics.com/products/adm-american-defense-manufacturing-ad-170-s-bsae

 

[JHL]

Thank you, I looked at this but DNT states with this mount the channel is wider than the ridge under their scopes, the mount will also shift the optic forward so my eye relief will shift, the height will lower from 1.54"to 1.2" and the total length of the base is very short compared to other one-piece QD mounts. I am not sure this the right solution as my current setup (height and eyerelief) are perfect.

 

[iFish]

All said is true enough. It's the eye relief that stopped me from getting one. So, you can permanently mount the scope to this, and then this to the rifle. I know you can zero the DNT, not sure about other scopes as it may raise the scope to much <shrug>

https://www.amazon.com/Smiths-KIT-Picatinny-Adapter-Detachable/dp/B0B9N6MFCV/ref=sr_1_7?sr=8-7