Just installed a Donny Fl Sumo on my Maverick. Is there shims or washers for indexing so the logo is at a certain position. Right now it’s at 6:00 o’clock. Thanks
Indexing Moderator
- Thread starter DanH
- Start date
Loosen the end cap and then rotate the can to where you want it and tighten it back down. If you have a 3D Printer, Thingiverse has a .stl files for a wrench that fits the star shape on the exit end of the moderator.
Upvote 0
If it's important to you, you could put an o-ring (try different thicknesses) at the base of the 1/2 x 20 Male thread. I'm not aware of "shims" to make logo show. I did the o-ring thing for a different reason & it didn't affect the alignment to the point of clipping. Personally I'm more concerned about quietness than aesthetics.
Upvote 0
Silent Thunder Ordnance sells exactly what you are looking for to index their moderators which btw are the best I have tried on my M3's. This guy used to design Suppressors for real guns and REALLY knows his stuff. His 21 part blog is the most informative thing I have ever read about sound suppression and worth a read.
https://www.silentthunderordnance.com/air/moderator-timing-shims
https://www.silentthunderordnance.com/air/moderator-timing-shims
Upvote 0
SFeltus, thanks for the link.
Has anyone tried adjusting using spacers to 'tune' their air rifle?
Has anyone tried adjusting using spacers to 'tune' their air rifle?
Upvote 0