IN SEARCH OF

Jump to latest Follow Reply
richter.brent1 said:
I shoot air rangers, trying to get into a bigger bottle. This model is for rear mounted bottles, do you know of one that would mount the front? I seen fx types but they have different threads
Click to expand...
Don't know Air Rangers so the plenum on this could be an issue. Universal M18 to M18.

shop.hubenpower.com

Huben Power Airgun Regulator Airforce condor Regulator

Thank you Air Shootist for the video. Huben Power 50CC Cricket-MAX-ATH Regulator This regulator can be installed in most airguns which use standard airtank with thread M18x1.5. Listed below are some of the M18*1.5 airguns. （In fact, it is not limited to these models airguns.） AirForce...
shop.hubenpower.com
 
Upvote 0
SpindleB said:
Don't know Air Rangers so the plenum on this could be an issue. Universal M18 to M18.

shop.hubenpower.com

Huben Power Airgun Regulator Airforce condor Regulator

Thank you Air Shootist for the video. Huben Power 50CC Cricket-MAX-ATH Regulator This regulator can be installed in most airguns which use standard airtank with thread M18x1.5. Listed below are some of the M18*1.5 airguns. （In fact, it is not limited to these models airguns.） AirForce...
shop.hubenpower.com
Click to expand...
What I need is an offset, not a straight in line, so I can screw in a massive bottle
I use it at the feedlots on pigeons and eruasians
It seems that the larger the bottle the more fpe, I at 96 fpe using a 1l, found a 1.5 bottle that is slightly wider than the typical .5\.7\1.0 liter
I shoot off a saddle so weight isn't an issue
 
Upvote 0
Like the Cricket Dream Universal, 50mm offset drop block.

shop.hubenpower.com

Huben Power M18-Dream Universal Regulator Ultra-stable output pressure

Huben Power M18-Dream Universal Regulator Ultra-stable output pressure Universal regulator, the front end of the cylinder is M18*1.5 thread. Ultra-stable output pressure External adjustment function Air chamber volume 25CC Regulating pressure range 500psi~3600psi Note: Please do not adjust the...
shop.hubenpower.com

Upside down Hatsan Bullmaster with the Dream and Tuxing 1.1L. Could go as large as the Acecare long 2L (not Tuxing).
20250209_204414.jpg
 
Upvote 0
richter.brent1 said:
This is what I need, will it install in this format, seems like it won't be in line.
Let me know thoughts thoughs

View attachment 537916
Click to expand...
Looks like the Dream Universal will work. Larger tank would require a custom barrel band.

That looks like a 0.5L (correct me if i am wrong) which would probably be 61.5mm diameter.
Not much spacing from bottle to barrel, I'll just assume 0mm.
Drop block offset is 50mm
So a tank 86.5mm or less diameter should work, 61.5mm + 25mm
Just so happens the Tuxing 1.1L is 86.5mm diameter. It is 311mm long so you need to check the distance to the moderator.
I'll measure the Dream later but probably another 150mm. Figure 475mm from gun to shroud would be needed.

Jake at jb3dpd.com does my custoNavarre bands.
 
Upvote 0
SpindleB said:
Looks like the Dream Universal will work. Larger tank would require a custom barrel band.

That looks like a 0.5L (correct me if i am wrong) which would probably be 61.5mm diameter.
Not much spacing from bottle to barrel, I'll just assume 0mm.
Drop block offset is 50mm
So a tank 86.5mm or less diameter should work, 61.5mm + 25mm
Just so happens the Tuxing 1.1L is 86.5mm diameter. It is 311mm long so you need to check the distance to the moderator.
I'll measure the Dream later but probably another 150mm. Figure 475mm from gun to shroud would be needed.

Jake at jb3dpd.com does my custoNavarre bands.
Click to expand...
That shroud looks like a real problem to be honest. Really limits the bottle length.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu