FX Impact Trigger block

[DesertSilver]

Has anyone had to replace their trigger block on their impact? If you did have much was it? I'm having a heck of a time removing the Oring in the regulator bore. It is known to be a real PITA! I think my problem is I think it's the original one from 2019 and has gotten real hard. I'm afraid I might have scratched the bore or groove with my brass Oring pick.

 

[Airgunmann]

Where is the leak

 

[Airgunmann]

It would help pin point maybe

 

[DesertSilver]

The regulator started leaking from the adj screw end. Never got a chance to check if air was coming out of the weep hole. Bought all of theOrings to reseal the regulator but that last Oring refuses to come out. Main reason I want to know how mush a new trigger block would cost is so I can start saving for one if it won't seal due tome scratching the bore or theories groove. I've have been really digging at it trying to get it out.

 

[Airgunmann]

Yeah they can be a pain I used a regular steel pic and got one out thought I scratched it as well turned out ok but I don't know for sure

 

[Gumby31]

I just picked at the O ring in the same place till I cut it in half cam out easy then....BUT then you got to get the new one in witch isn't easy either. good luck took me 8 hours.

 

[Vetmx]

I don’t know what kind of “pick” you’re using but with all inside orings you stab and lift them out. I make my own tool using a beefy sewing needle. Game over for any oring I’ve encountered so far.

 

[Airgunmann]

To get it back in I've used 2 picks and patients

 

[bigHUN]

I would start asking your local FX Dealer.
Back in time I was doing some internal surgeries in my MK2 Valve + Rear Block and wanted to have a spare if anything goes South. My dealer didn't had a part (that was before the Power Plenums got popular).
I ordered my spare parts from Europe.
Here are your MK1 parts
https://europeairguns.com/en/parts/fx-airguns/impact/impact-mki

 

[DesertSilver]

I've got a message into Utah airguns which is the closest FX dealer to me but they haven't gotten back to me yet. If I don't hear anything by lunch time tomorrow I'll call them.

 

[DesertSilver]

Utah airguns got back to me. The price for the MK2 trigger block is $287 plus tax and shipping. Everything has to be transferred over to the new block as it's just the block. It will take 3-4 weeks to get it from Sweden.