Micheal - did you see his update at 6:40am? It didn't come loose - it sheared off.......not good."Michael"Can you try to explain how you think this happened. On my Impact (& any others I've inspected) the set screw for the probe must be fully seated before it will cock. Meaning that the tolerances are so tight that if the set screw did become lose (or I forgot to tighten it all the way) that the screw would prevent the probe block from moving at all. Therefore the action could not be cocked. Can your Impact be cocked with the set screw protruding outside of the probe block?
Upvote 0