Impact M3 Tungsten Hammer "Spacers"

[jackp_MDB]

Will install a tungsten hammer on my Impact M3. I already had a slug kit installed and that included 2 "spacer" washers.

Should I also include these spacer washers when I install the tungsten hammer?

 

[Nsboost]

Just so ya know... You will lose a bunch of your adjustability with the tungsten hammer because it's physically longer.

And I might be wrong but I would take the spacers off or you'll have no adjustment

 

[qball]

You don’t need and don’t want the spacers. Even with just the tungsten hammer(without spacers) I already can over hammer 160 bar reg pressure without close to maxing out the hammer.

 

[jackp_MDB]

Thanks...I'll just install as is.

 

[7Green]

I would be curious how much a modified tungsten hammer would weigh if made. Delete the whole hammer weight entirely, extend the hammer's skirt to up the weight and install a longer spring. FX are you listening.

 

[Seeker]

You don't need any spacers because tungsten hammer weight has them 'built in'. Its head is longer.

 

[Ctkny]

no spacers needed.. just the tungsten hammer