FX Impact m3 help

[thunderxt1]

I was playing with my m3 and accidently play with the power wheel and second regulator meanwhile not noticing the gun was cock. Now my pellets are shooting all over the place. Is my gun screw? What do I do?

 

[CrashKT]

Time to learn to tune.

1. Remove bottle and degas gun.
2. Move Macro to middle position (8) and Micro to (3).
3. Move Valve Adjuster to right over 4th line.
4. Set First Reg to 150 Bar.
5. Set Second Reg to 50 bar as starting point.
6. From here, slowly shoot and adjust your second reg a 1/8 to 1/4 turn at a time until you reach about 10 to 20 fps or so below desired FPS.
7. Now from here use your Macro wheel to hit desired Fps within 5 to 10 FPS.
8. Once you are in that 5 to 10 FPS range, use Micro Wheel to make with in 5 FPS or so more consistently.
9. Now, once at FPS needed, SLOWLY turn Valve Adjuster IN (1/8th or LESS) to further add to consistency. YOU SHOULD NOT HAVE TO TURN IN MORE THAN HALF OR SO.

This is my way of doing it. My reasoning is to let the reg do 90% of the work and then use Macro and Micro so finalize it. Don't worry about numbers just accuracy.

 

[Troy Bakel]

Time to learn to tune.

1. Remove bottle and degas gun.
2. Move Macro to middle position (8) and Micro to (3).
3. Move Valve Adjuster to right over 4th line.
4. Set First Reg to 150 Bar.
5. Set Second Reg to 50 bar as starting point.
6. From here, slowly shoot and adjust your second reg a 1/8 to 1/4 turn at a time until you reach about 10 to 20 fps or so below desired FPS.
7. Now from here use your Macro wheel to hit desired Fps within 5 to 10 FPS.
8. Once you are in that 5 to 10 FPS range, use Micro Wheel to make with in 5 FPS or so more consistently.
9. Now, once at FPS needed, SLOWLY turn Valve Adjuster IN (1/8th or LESS) to further add to consistency. YOU SHOULD NOT HAVE TO TURN IN MORE THAN HALF OR SO.

This is my way of doing it. My reasoning is to let the reg do 90% of the work and then use Macro and Micro so finalize it. Don't worry about numbers just accuracy.

You forgot to tell thunder to degass the bottle before screwing it back onto the rifle or it will blow the whole tune.


Pun intended.

 

[Trucker3573]

You forgot to tell thunder to degass the bottle before screwing it back onto the rifle or it will blow the whole tune.


Pun intended.

I have never done this and no problem tuning. ??

 

[CrashKT]

I have never done this and no problem tuning. ??

I think it was a bad joke? It flew over my head

 

[Troy Bakel]

I think it was a bad joke? It flew over my head

You had Thunder remove the bottle, degass the rifle and then tune it without replacing the bottle.

Novel just bloody novel.

 

[Trucker3573]

Ahhh. Ok. Lol

 

[DesertSilver]

You had Thunder remove the bottle, degass the rifle and then tune it without replacing the bottle.

Novel just bloody novel.

Picky, picky, picky.