So I recently purchased a M3 Compact and it was shooting lights out. I don't have measurements but basically 21 pellets in 4 pellet holes at 20 yards. Macro set at 8 and 1.25 on the micro and everything else was left at factory settings shooting Crosman 14.3. I was able to take it and shoot at longer ranges and adjusted the macro back up to the stock setting of 16 and figured I would play with the micro a bit and noticed it was not adjusting. It turned out to be a loose allen screw and with that solved I was able to get it back to stock 16 macro and 2 micro. Now I am back to shooting in the backyard again at 20 yards and shots are all over the place. I will put two or three through the same hole and get one high, another two or three and one right. No consistence and I know I am not pulling these shots.
I did not take my time with these as I was just trying to see if there was any difference between pellets and did not plan on posting here but figured what the heck after I was done. I still fill confident something is off. 6 shots per group. Probably 600-700 rounds through the gun. Any suggestion on what is going on?
I did not take my time with these as I was just trying to see if there was any difference between pellets and did not plan on posting here but figured what the heck after I was done. I still fill confident something is off. 6 shots per group. Probably 600-700 rounds through the gun. Any suggestion on what is going on?