Impact fine adjustment power wheel is finally ready to ship

Jump to latest Follow Reply
Mrshosted

Mrshosted

Member
Jan 28, 2016
906
476
Utah, United States
image.1620878518.jpg
image.1620877822.jpg


It been a long hard road. But finally I have then ready to ship out. Utah Airguns has been so kind to offer to retail my power wheel. If you'd like to get one please call Utah Airguns for one. Ill be dropping them off tomorrow. If you where one of the lucky people to make on the early bird list I'll be reaching out to you.

There is know way these will dimple. These are made from steel that has been handed to a Rockwell 58, then a hard black finish was baked on the wheel. Offering a 19 point ramp from Max to min. Offering the same range as the factory original but adding finer adjustments From Max To Min with out the worry of dimpling the cam. Making this a true up grade for your Impact (I have notice on some tunes the settting #1 is not usable but the other 18 setting work normal) Thanks Mont
 
No offense but that look ugly as hell. Don't match the gun. The stock wheel looks way better on the gun. That looks like a big plastic bottle cap and a big screw in the center.
Click to expand...

Impact X, no offense taken, I appreciate your opinion. I'm sorry you don't like the looks of my power wheel. My main focus had been on building the best fine adjustment wheel that would not dimple and last 100,000 shots while adding to the quality build of the Impact. I spent my resources on the cam design, material, and fit of the wheel. My Power wheel is designed with use in mind. The wheel is hardened to a Rockwell 58, then a heat treated black oxide mil spec is added. making the wheel very durable. The added dimeter and shape is help with making adjustments easer to to fill each click, even if waring gloves. The button head cap bolt replaces the 90deg counter sunk bolt to make the tension on the knob adjustable. With adding or removing the nylon washers I include with each wheel. You change how tight the wheel fills when turned. Allowing for a perfect fit. Please fill free to PM with any suggestions . Thanks Mont
 
Upvote 0
Mont,

Nice upgrade. I know how much effort it takes to get an idea to reality. Since it doesn't seem like FX's new adjustment Wheel will retrofit, this should be a welcome upgrade on many Impacts,



Well Done

Joe
1f60e.svg
Click to expand...

Fyi m3 power wheel does work on mk1 and mk2.



http://m.youtube.com/watch?v=kLeOA5_7Ua0

Click to expand...

Well that's fine except for two little details.

MR's wheel if built to the specs he quoted is a far superior item to the Stock FX wheel, especially for tuners with RC 58 Heat Treat. The second being the FX wheel is made out of the same material as a lot of FX parts Unobtanium!!!

Good Luck getting one.



Joe😎
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu