"sniperlabyo"Been scratching my head--why in the world you can't pull the barrel out after loosening the barrel locking screw till it clear the slot on the barrel because that's the only thing that will prevent it from coming out unless the cocking pin back out then rub on the barrel if that happens gun won't cock, even with a loose set screw for the probe --probe it's going to get stuck in the barrel -- if it did its small enough to clear the barrel bushing and side out with the barrel.
did the brass adapter for the TP separated from the barrel smooth bore?? I can see that jamming the barrel.
is the cocking block jammed -- the barrel go through that block, if it was the cocking handle will not move and you can't do a thing.
there are orings in the shroud--if over expended with force it can miss aligned them -- and will no longer smooth to side.
I keep a log with all the issue and fix with the impact and that's a 1st, so please tell me the cause when you find out---- I know this gun inside out and I'm baffled why it got stuck!!!!