I took too much air

[josh3rd]

out of my RX2's gas ram. So now what? I should have just left well enough alone but in my opinion, my rx2 was charged fully to its max, shooting harsh, which isn't good and hard cocking. So I decided to unscrew the screw where the valve is and tapped it twice. Well twice was too much. So does anyone have a pump I can borrow or tell me how to build one? Thanks a bunch.

 

[D-RIG]

i used a regulator one time to charge my gas ram with my air bottle

just set the pressure on a reg to 750 psi to start with then you need to

shoot the gun and see what fps is I ended up around 850 psi .



Yes a hand pump is the best way to do this .

 

[josh3rd]

D-Rig, how and what do I exactly need to build one?

 

[John "spysir" Blount]

You can use a hand pump , a stirup pump was original, Using scuba can be done but w/out any regulator you could create an issue fairly easy.

Raw makes 2 types if you need to fill adaptor.

https://www.rapidairweapons.com/xcart/product.php?productid=17629

You'll love it set just a bit ubder factory max. Excelent rigs.





John

 

[D-RIG]

As mentioned above a hand pump is best and much safer

in the link provide above thats the same adaptor that I used . 

To use the regulator I had to use a custom made regulator

checker that I had someone make for me , I only went this 

route because I did not have a hand pump . 

 

[D-RIG]

Also something that would work good would be to 

purchase the adaptor that will attach to your gas ram

and then use a paintball reg and set it to the appropriate

pressure setting for your gas ram like I mentioned 750 psi

is a good place to start . 

 

[josh3rd]

D-rig and spysir, thank you. I just wish someone was close who had one.

 

[Str8tshooter]

AOA has the proper pump and gauge, or you could build your own:

https://www.gatewaytoairguns.org/GTA/index.php?topic=95707.msg895517#msg895517