I NEED A MACHINIST.

[askernie]

Hey guys and gals, 

I need a machinist that can machine two barrels for me. 
I’d appreciate any suggestions. Back in the day I used a gentleman named “Art” from the Crosman forum but I don’t have his contact information. 
I appreciate any help.

ernie 

813-598-2902

 

[Yo]

TimmyMAC am I allowed to mention? Or Roy Weid at Mountainair if they're still open. Nitin Nelapudis shop is closed till further notice would have been first choice great fella. Pilkguns does machining too if they're open if Scott has the time. YO!

 

[Yo]

Ask Motorhead sorry forgot about Scott. YO!

 

[SteveV]

Hey breaux Ernie -

If it's Crosman related I'm sure Roy at Mountain Air Custom Airguns can take care of that -

 

[Keith Rush]

Ernie,

I have talked to Mountain Air as I was looking to get a longer barrel for my Marauder Pistol. He can do the barrels, but he cannot do a stainless barrel.


Does anyone know who can do stainless barrels?



Keith

 

[Tvanpool]

Ernie,

I have talked to Mountain Air as I was looking to get a longer barrel for my Marauder Pistol. He can do the barrels, but he cannot do a stainless barrel.


Does anyone know who can do stainless barrels?



Keith

There must be some other factor as to his not wanting to do the job. Stainless machines exactly the same as other barrel material (chrome moly). Actually stainless is easier to get good surface finish on. Any gunsmith that can do barrel work can do it. 

 

[Keith Rush]

Ernie,

I have talked to Mountain Air as I was looking to get a longer barrel for my Marauder Pistol. He can do the barrels, but he cannot do a stainless barrel.


Does anyone know who can do stainless barrels?



Keith

There must be some other factor as to his not wanting to do the job. Stainless machines exactly the same as other barrel material (chrome moly). Actually stainless is easier to get good surface finish on. Any gunsmith that can do barrel work can do it.

Tvanpool,

Just going by what he told me. He said he didn't have the tooling bits to do stainless steel, but he could do chrome moly no problem. Just needed the breech and bolt, as I am looking to get the .063 barrel.

Keith