With 600mm barrel at 125 bar reg I achieve 940 fps with 34 grain .25 pellets.
I made all the required mods to fx Impact pic heavy
- Thread starter mubhaur
- Start date
Indeed some good workmanship,
One question if I may, How many shots per fill?.
opps three ?, is that also a home made gun stand?, and, is that a car jack?, I may copy that.
many thanks.
One question if I may, How many shots per fill?.
opps three ?, is that also a home made gun stand?, and, is that a car jack?, I may copy that.
many thanks.
Upvote 0
I don't machine myself but my machinist does it for me.
No doubt he is a good machinist.
Regards,
Umair Bhaur
Upvote 0
try M14 threads on the right has better performance compared to the 1/8 28 on the left
Dear Ernest,
In my experience M14 offers more air flow that is not always required . Unless I have to use heavy slugs, I dont need M14. Use of M14 for average weight pellets sometimes becomes counter productive for extreme accuracy.
You see that in my design, the cap of the plenum is on the male side threads, so I can make one more cap of M14 if needed in any future time.
Too low reg pressure some times compromises accuracy in my tests.
Regards,
Umair Bhaur
Upvote 0
