Hy score 801/D25

[Septicdeath]

I'm looking to rebuild a old Hy score 801. Does anyone know where I can get parts?

It is the German one not the Belgian 

 

[d3vnull]

Interesting rifle. possibly a Diana 25 from this article?

https://www.pyramydair.com/blog/2010/01/hy-score-801-part-1/

Here is the breakdown:

https://www.gunspares.co.uk/products/24372/25/

 

[Septicdeath]

Interesting rifle. possibly a Diana 25 from this article?

https://www.pyramydair.com/blog/2010/01/hy-score-801-part-1/

Yes read the article. Maybe the 25 parts will work just finished a 425.

 

[d3vnull]

Sorry, edited my response after you replied.

Here is the breakdown on the Diana 25:

https://www.gunspares.co.uk/products/24372/25/

 

[Septicdeath]

I talked to a friend. He told me where the date stamp on this gun was. Checked the entire gun with my optivisors there is no date markings. But from the looks of the rear sight I think it might be a older model???

Removed the surface rust and will refinish the metal at a later date.
The barrel is in excellent condition. Cleaned no pitting. Just finished installing a leather seal I made. The chamber and piston was surprisingly clean. Ran some fine steal wool on my flex shaft into the chamber no rust flashlight showed nice and shiny.

Put it back together. The trigger needs some work but will do it later. Since I will be tearing it apart again soon.

Hopefully have located the parts I need. Will know next week when my package arrives. End cap and a couple set screws. 

Still need barrel pivot bolt and stock screws 

 

[Septicdeath]

Rear sight on newer model compared to sight on mine

 

[Septicdeath]

Hy Score/D25 I need a pivot bolt pin. Do you know where to get one or if a pin from another model will work,? Its the only part I can't find. Have looked everywhere. Literally. 

Thanks

 

[Odoyle]

https://www.gunspares.co.uk/products/24372/25/

 

[Septicdeath]

Stock refinishing. Received some of the parts for rebuild. Will be working on it soon.

 

[Septicdeath]

My 1947 Hy Score has been tore down. The stock refinished and parts wire brushed cleaned and re-blued. So far its looking pretty good. Have everything I need to finish it except stock screws. Will get them at hardware store. 

Looking new. Before and after pics.

 

[Septicdeath]

I am finally finished restoring my Hy Score 801. It turned out good. What do you think. There is something special about taking a gun from the graveyard and giving it new life. The gun cocks buttery smooth and the trigger has a very light pull. there is hardly any recoil, due to it being a low power youth Springer. , Useing Crossman premier pellets.These averaged 417 f.p.s. and ranged from 414 to 422. Will be shooting it to test accuracy soon.