How low can you get the HW97 trigger pull? Have adjusted mine down to the lowest level but have no trigger gauge to check it was just wondering what it would be at the lowest setting?
HW97 Trigger Adjustment
- Thread starter Woodwreck
- Start date
Without touching the front sear screw and not allowing the 1st stage to go "floppy", you can get it to right under 1lb give or take just by using the large gold screw behind the trigger. By adjusting that front screw (very carefully) you can get it much lower.
Last edited:
Upvote 0
If you do your own trigger tuning you definitely need a trigger pull gauge. When done don’t forget to do the bump test to make sure it’s still safe. Uj
Upvote 0