N/A HW100 upgrades

[Hobbyman2007]

Seeing as I love my HW100’s so much I thought I’d share what my favourite upgrades and mods are.
1- light weight cylinder ( I use Ratworks )
2- new style cocking levers ( Apex airguns has them)
3- remove the restrictor on the valve stem ( small brass collars)
4- Rowan engineering triggers
5 - stainless swivel studs
6- 3D printed double magazine holders
7- degrease the trigger and replace with moly( not a mod but more of a must do)


What are you guys doing to improve this timeless classic?

 

[Filnez]

My gun is the HW100S rifle. I got the extended length Rat Works cylinder for mine. The USA spec newer rifles are 50 joules and they don't have the restrictor on the valve. I was getting two magazines full of shots from the factory cylinder, the Rat Works FAC model brought it up to 42. On this rifle I decided to try the recessed cup type pushbutton sling attachment. I had just as soon went with regular old sling studs, all you gain is nothing projecting from the stock when a sling is not in use. The recessed cup kit came with adapters for standard swivels if wanting to use a sling with those on it already instead of the push buttons. The cups were a pain in the butt to install. I haven't messed with the trigger as I have been fine with it as is. The rifle was fantastic as it came, I just wanted to get more shots from a fill, mainly when target shooting. 28 when squirrel hunting was really enough as I had never ran out but when shooting paper running into the house and filling up less times is a bit better.

 

[Lewis]

Great list. Thank you.
Sounds like the best upgrade is sending one to you!

How about a Lefty Indonesian Rosewood stock?