HW100 Bullpup Carbine Chrony Results

[LMNOP]

14.3 CPDs, it loves ‘em accuracy wise as well. Caldwell optical chrony and CPDs out of the tin as-is with no prep.

 

[LMNOP]

Meant to add, was quite pleased to see these results versus the 912 FPS seen in HardAir Magazine in 14.3 CPHP.

 

[elh0102]

I don't know if you have an interest in a heavier pellet, but my .22 K carbine shot the JSB 18 at the velocity you are getting with the 14. And that was close to max HST, about 96% probably. I didn't change the reg set point. And if your BP has the longer barrel, then you have more higher speed/heavier pellet potential. My carbine was the 410mm barrel, about 16 inches.

 

[LMNOP]

Thanks! I got the 9" version so I'm really impressed with the results. Between my Concept Lite and the HW100 BPC I just shoot CPDs. I've got about 22K pellets and I just use them for personal use. I'm not jacking the prices up to resell them or hoarding them it's just nice to have pellets on hand especially in the weird times we're in today with respect to supply availability. Most of them I grabbed back when AGD did a buy and get free program.

I like to keep it simple with just a single pellet type so that I know consistently where and how they shoot. I was really pleased with the ~937 over ~912 I read about in HardAir Mag.

 

[Hynzie]

thanks for the post ,not many of those BP come along on these pages ,some photos would be great PAT

 

[LMNOP]

This thing is tiny the barrel with suppressor is shorter than the air tube on my Concept Lite. I would do a side by side but it is packed up for sale. I love this little bullpup. Concept Lite was great as well do not get me wrong but I am a one PCP kind of guy.

Flush fit fill probe is making it’s way from the UK. 30 shots at 200 bar at 837 vs 30 shots at 240 bar in the Concept Lite at 865 fps

 

[elh0102]

That's a short barrel, but it's gotta be longer than 9", was that a typo?

 

[LMNOP]

Not sure — depends on where you start and end I guess. 9” - 9.75” - 10”? Not trying to be coy or snark legitimately not sure.

 

[elh0102]

Yep, you're absolutely right, my bad. Guess old age is getting to my eyes! 

 

[Hynzie]

thanks for the pics thats a sharp looking rig for sure ,i book marked thanks again pat

 

[cea1960]

I've had the .177 version for about 21 months now and I too love it. I've been shooting the Mako 10.5gr slugs and they're doing a great job. I haven't shot it over the chrony to see when it falls off, I just refill after 3 mags. (42 shots)

 

[Therealld]

I suspect the barrel is longer than you think, Most repeater type guns like that have the breech of the barrel more or less backed up to the front of the magazine. They also usually have the muzzle end inside the silencer a bit.

 

[Dairyboy]

On Weihrauchs site it shows 310mm for the barrel which is 12.2". Regardless a very cool gun! I've been interested in them in the past.

 

[LMNOP]

Sent 400 rounds down range today. Love this thing it is a keeper for sure! At this point I cannot find a single fault or something I do not like about it or would change.

 

[CharlieF]

Here is mine. Not the carbine but 24.5 barrel in .177 cal

Super weapon. Like it so much I ordered one in .22 today. 

Loves CPRN COPPER AT 10.6 AND H&N BARACUDA MATCH 10.65

VELOCITY RESULTS VIA FX CHRONY

CPHP 7.9 GR. 1080 FPS

CROSMAN DSTRYR. 1086 FPS

H&N BARACUDA MATCH 10.65 961FPS

CROSMAN POWER COPPER 10.6 980 FPS

Target range 25 yds fired from bipod Ignore fliers on CPHP

they are from a previous shooting session

 

[KatoKevin454]

Here's mine not the carbine either but a .22 cal, it's a Rat killer, I have it dialed to 90 bar reg setting and the hammer spring set to give me 780fps and I get 36 good shots.

also my HW100 T FSB .20

 

[LMNOP]

Nice setup! I had made some typos earlier.

Concept Lite is 865 FPS

Hardair Mag listed .22 CPHP at 812 FPS

I am getting 837-840 as seen in the first post with CPD.

I am amazed at the accuracy and FPS with this wonderful rifle.

 

[bambuino]

Say folks I got an HW100 SK .22 two weeks ago and been wanting to get better results with the CPHPs. My factory tune rifle with 410mm/16" bbl sends em at 899FPS (26ish FPE), a difference of about 15FPS/inch bbl than what @LMNOP posted for his 14.3gr'ers in his BP. My groups are just under an inch at 35-45YD...I think the rifle can do better than that. Would the CPHP 14.3's perform better at slower speeds in these HW barrels? Better if run hotter?

BTW, the 18.1's at 810FPS group really well out to 50YD. I just wanna give the CPHPs a go for a while.

ATB, Mark

 

[LMNOP]

I had a Commander that would shoot ‘em 960 FPS. My recommendation — leave it alone CPD/CPHP seem to fly the best around 800-900 FPS.

You try CPD at all? Mine seem to fly better at 40 yards or more than CPHP

 

[bambuino]

Yeah, I have one tin CPDUM, washed and waxed other night. Was gonna give em go this weekend. I have 12 tins CPHPs. CPDUMs are not stocked at the local Wally but once in a long while.

I have a spare digital pressure gauge so I probably be making up a reg tester soon.