Huma Regulator xxl question

[Sdrawkcabnipyt]

Huma in their instructions say they include a M3 screw that would go into the top. People tie fishing line to it so they can retrieve it and tune it.

Mine didn’t come with one and when I inquired huma said they’re outdated directions and the screw is already installed. I don’t know what they mean already but do you guys know if it’s safe to put a screw on the top now?

 

[SciueraPlumbea]

Huma in their instructions say they include a M3 screw that would go into the top. People tie fishing line to it so they can retrieve it and tune it.

Mine didn’t come with one and when I inquired huma said they’re outdated directions and the screw is already installed. I don’t know what they mean already but do you guys know if it’s safe to put a screw on the top now?

View attachment 564630

Use the end of a cleaning brush. Same Pitch. (.22 or larger) .177 can have an M2

 

[JaceSpace1369]

Huma in their instructions say they include a M3 screw that would go into the top. People tie fishing line to it so they can retrieve it and tune it.

Mine didn’t come with one and when I inquired huma said they’re outdated directions and the screw is already installed. I don’t know what they mean already but do you guys know if it’s safe to put a screw on the top now?

View attachment 564630

The grub screw is inside the brass piece, to remove it you need a 2mm allen.

 

[Sdrawkcabnipyt]

The grub screw is inside the brass piece, to remove it you need a 2mm allen.

Oh! And that’s what I tie a fishing line to? Thank you it didn’t make sense to me when they said it was inside already

 

[JaceSpace1369]

Oh! And that’s what I tie a fishing line to? Thank you it didn’t make sense to me when they said it was inside already

Yeah, I guess he could do that, but it would have to be a very, very thin fishing line. Maybe ten pound braid?

 

[Sdrawkcabnipyt]

Yeah, I guess he could do that, but it would have to be a very, very thin fishing line. Maybe ten pound braid?

This is what I’m referencing. I guess maybe I don’t understand. I just want a way to pull it out if I want to adjust the pressure settings

 

[JaceSpace1369]

This is what I’m referencing. I guess maybe I don’t understand. I just want a way to pull it out if I want to adjust the pressure settings

View attachment 564650

Ohhh okay. Hmm, what gun is it going in? This would probably be of better use. Just make sure to put some kind of rubber to not scratch the regulator shaft if you are worried about that

https://a.co/d/fulGfMA

 

[Sdrawkcabnipyt]

Ohhh okay. Hmm, what gun is it going in? This would probably be of better use. Just make sure to put some kind of rubber to not scratch the regulator shaft if you are worried about that

https://a.co/d/fulGfMA

Benjamin marauder. It’s a pretty long resevoir, probably would be too short but ty

 

[RobBonnell89]

I adjust my marauder pistol reg inside the tube with a long screwdriver I made from an arrow shaft. It would take a lot longer one for MRod but I’d try to make something if it was me. Risk tearing a oring if you take your reg out a bunch during tuning. I also mark lines on top of reg so I can see setting inside tube.

 

[Sdrawkcabnipyt]

I adjust my marauder pistol reg inside the tube with a long screwdriver I made from an arrow shaft. It would take a lot longer one for MRod but I’d try to make something if it was me. Risk tearing a oring if you take your reg out a bunch during tuning. I also mark lines on top of reg so I can see setting inside tube.

I had an m3 so I said wth let me just try. Tied some fishing line to it and screwed it in, when it stopped reversed one full turn. Works like a charm, I can use pliers to pull the fishing line up, adjust the regulator before the threads of the rsservoir, and then push it back down with a ½” pvc.

I’m dying though, Ive disassembled this gun probably 5 times in a week and shot 500-1000+ shots, all hand pumped lol.

 

[RobBonnell89]

I had an m3 so I said wth let me just try. Tied some fishing line to it and screwed it in, when it stopped reversed one full turn. Works like a charm, I can use pliers to pull the fishing line up, adjust the regulator before the threads of the rsservoir, and then push it back down with a ½” pvc.

I’m dying though, Ive disassembled this gun probably 5 times in a week and shot 500-1000+ shots, all hand pumped lol.

Good thinking. I’ve been tuning my PRod for weeks. Try not to let the obsession get the best of you lol. I would not want to being tuning with a hand pump. Especially pumping from completely empty. Start saving for a gx compressor. You’ll be so happy you did. Good luck and have fun

Rob