• The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.

Huma Regulator fitting in Daystate Huntsman Classic 177 FAC

Jump to latest Follow Reply
Pretty easy job, I've done it on my Regal XL FAC. Hardest part for me was removing the air cylinder which required a good amount of heat. I'd think the 177 would be good without one, probably even better than the 22cal. It is nice though not to have to worry about the filling and refilling pressures. The XL air tube may be longer than yours so keep in mind you'll lose a little capacity installing the regulator. Here are the fitting instructions from Huma.

http://foto.huma-air.com/foto/Installation%20guide%20Daystaye%20Wolverine.pdf
 
Upvote 0
Pretty easy job, I've done it on my Regal XL FAC. Hardest part for me was removing the air cylinder which required a good amount of heat. I'd think the 177 would be good without one, probably even better than the 22cal. It is nice though not to have to worry about the filling and refilling pressures. The XL air tube may be longer than yours so keep in mind you'll lose a little capacity installing the regulator. Here are the fitting instructions from Huma.

http://foto.huma-air.com/foto/Installation%20guide%20Daystaye%20Wolverine.pdf
Click to expand...

ok...to remove complete air do i have to continue dry firing...or remove it after loosening the manometer or??
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu