Huma has regulators that will fit Impact models with 13 and 16 mm pistons.
I paid $123.01
No idea of the shipping time to the US
I paid $123.01
No idea of the shipping time to the US
Huma now available for FX Impact
- Thread starter PerkyVal
- Start date
I have an Impact X, and I have been beta testing the Huma for a couple of months now, and yes it will fit the X.
Upvote 0
If it uses the 13, or 16mm piston. I dont know what the X has, or if the ones available will fit the X
Upvote 0
I have a huma in my .25cal impact non x. I have been testing it a few months now. Seems to be working well with very little creep. Its a little different design than original fx reg and comes encased in a housing that fits into the action rather than loading and dropping the piston and washers/springs down into the reg hole. SD of 3 over a 70 shot string with 34gr jsb pellets straight out of the tin. I have it set at 149bar according to the fx reg gauge and its shooting them 855-860 fps very accurately.
Upvote 0
My X has a 16.1 mm piston. My factory regulator came with a very good regulator. I started out with a factory SD of 3.2. Initially, the Huma was a little over double that. A lot of experimenting with springs, stacking and adjusting and the last test was 2.6. I have not received the final release version yet.
Upvote 0
Upvote 0
In the description says "It can be placed into the action within a minute without any modification done to the rifle"
Is it really that easy to change the Impact regulator?
Upvote 0
Hi Folks,
This link " https://www.huma-air.com/FX-Impact-Tuning-Regulator " page says the Impact reg is still out of stock. What gives?
This link " https://www.huma-air.com/FX-Impact-Tuning-Regulator " page says the Impact reg is still out of stock. What gives?
Upvote 0
In the time it took me to type the above message they have updated their site and I now have one on order.
Upvote 0
