I just installed a Huma reg into my .25 wildcat. I had it set to 145 bar and made no other adjustments to the gun. I aired the gun up to 200 bar last night and left it for 24 hours to see if it was leaking any air, it was still at 200.
This evening I put 11 rounds through it. Each consecutive shot seemed less powerful(I wanted to make sure POI was still good before setting up the chrono). By the time it got to the last shot the pellet landed 15 feet in front of the gun. Now no air comes out when I fire it. I checked the gauge and it's still at 200. I even added some air to make sure the gauge wasn't stuck. The reservoir is definitely at 200 bar.
I decided to empty the reservoir and check the reg, but when I opened the brass air relief allen, no air comes out. So now I have a full tank and no way to bleed it off. I think my only option is to loosen the air gauge. Any help would be really appreciated.
This evening I put 11 rounds through it. Each consecutive shot seemed less powerful(I wanted to make sure POI was still good before setting up the chrono). By the time it got to the last shot the pellet landed 15 feet in front of the gun. Now no air comes out when I fire it. I checked the gauge and it's still at 200. I even added some air to make sure the gauge wasn't stuck. The reservoir is definitely at 200 bar.
I decided to empty the reservoir and check the reg, but when I opened the brass air relief allen, no air comes out. So now I have a full tank and no way to bleed it off. I think my only option is to loosen the air gauge. Any help would be really appreciated.