Well I got a hare today and decided to "rebuild " my hugget." The Wildcat is a year old and 10000 22 cal pellets thru.
Now this isn' hard to do but not as easy either. The trick is to get the end cap off without dinging the finish. I got the barrel end off but had to use pliers on the exit cap.
little black marker made it better, not perfect. I picked up a sheet of craft felt @Wally world (23 cents). You have to cut it to length and width and get the exit end put together first. This is the hard end you have about four pieces to align and get back in the hole put the in cap back on. Once you do this the others are easy. it sure was leaded up my hands were solid lead whenever I pulled this apart. Scrubbed it all up and dried it all up and put it together. Test shot it, everything's good. YES I USED RUBBER GLOVES!
Now this isn' hard to do but not as easy either. The trick is to get the end cap off without dinging the finish. I got the barrel end off but had to use pliers on the exit cap.
little black marker made it better, not perfect. I picked up a sheet of craft felt @Wally world (23 cents). You have to cut it to length and width and get the exit end put together first. This is the hard end you have about four pieces to align and get back in the hole put the in cap back on. Once you do this the others are easy. it sure was leaded up my hands were solid lead whenever I pulled this apart. Scrubbed it all up and dried it all up and put it together. Test shot it, everything's good. YES I USED RUBBER GLOVES!