Airforce Huben Power Regulator on a Condor SS .25 vs Stock Tank

I got the chance to do some head to head testing with my .25 Condor SS, equipped 2 different ways; stock tank vs Huben regulated setup.

My goal was to have the reg set pretty low (~2400psi) and see if I could get a good tune for 34gr FX pellets at sub 950fps. The Huben reg I used is the M18 threaded version (https://shop.hubenpower.com/products/cricket-max-ath-regulator?rs_ref=xFnJgccX) so I got another Condor Hi-Flo valve from Airforce and mounted it up to the reg. You could, of course, just re-use your stock valve for this and there's another video on my channel showing how to do just that. Anyway, I used a cheap 360cc 4500psi Tuxing bottle (https://amzn.to/3XKlzZ7) from Amazon for the reg'd setup. For the stock bottle comparison I just used the stock tank with no modifications.

I explain it all in the video so rather than typing a novel here, I'll just post the video below:


The regulated performance is highly impressive. I'm getting like 50 consistent shots or so at 60+fpe with the reg. This Condor is now perfect for taking on a weekend hunting trip without worrying about running out of air or dealing with a bell-curve of velocity (and therefore point of impact changes). I continue to be impressed by these regs!

PS: You guys can save 10% off anything at Shop.Hubenpower.Com with code RSZA


Anyone else tried these regs? What do you think? Would you like to see any more videos on these regs? (I've done a bunch already)

Cheers!

-AS