Sí, yo. Tengo un V3, pero no tengo tornillos extra. :Rodar los ojos:

(¡Cada arma fabricada hoy en día debería estar equipada con picatinny!)
Si correcto el riel de 11mm es un quebradero de cabeza, además tienes que apretar mucho porque sino sale el visor por delante,se va moviendo por el carril, la solución poner una base weaver atornillada.
Saludos.
 
Does the RMR plate from huben3dparts need the center screw to fit? I believe he has then in stock
1000001005.jpg
 
  • Like
Reactions: JaceSpace1369
photo_2024-05-13 22.56.47.jpeg

I've frankenstein'd a FAB DEFENCE COBRA stock adapter for my GK1. It's made from modified old pic rail elements and parts of a heatsink. i also modified one of the GLOCK adapters, that came with the stock. filled up cavities with resin and tapped M4 treads. (and broke off one tap, but lucky me got it out still. below amidst the messy workbench with synth prototypes.)
photo_2024-05-13 22.49.21.jpeg

photo_2024-05-13 22.49.30.jpeg

it is all made with basic hand tools and might need a paintjob to cover scratches and imperfectios, but in a way, i am all for the scavenger look on the luxury item. used a longer grip bolt and inserted one brass M4 thread thingie (what are they called in english?) into the grip to stabilize the pic rail, that is mostly held by the M5 bolt. it is all very stable, and does not move a bit, but the main joing of the COBRA stock is a little bit wobbly as such, but when shouldered, it works very well and deploys super fast. (i actually am not sure if it is an original, since i got it from an airsoft store in hongkong.) taking the stock off takes also only a few seconds, with the 2 handscrews.
photo_2024-05-13 22.56.38.jpeg
what i like about this stock is, that it still let you still holster the gun. although the whole thing gets kinda clunky and sci-fi, especially with the silencer on as well.
photo_2024-05-13 22.56.43.jpeg

photo_2024-05-13 22.49.26.jpeg
 
Looks like you having some fun with this little marvel,...how do you like the Huben pistol overall ?
It's so much fun to shoot that I have had to start casting again... i'm shooting all the time now and since I have the 25 cal buying pellets by the tin is impractical. So I spent the equivalent of about 5 tins of jsb on a bbt mold that casts 39 grain hollow points. I am hoping that these shoot well.

I love the feel and adjustability of the trigger, the grip works perfectly with my hand, it is easy to disassemble and service, even the feel of the shot cycle and the sound of the report are pleasant.

Couldn't be happier.
 
Somebody here posted a picture of a GK 1 with a long Picatinny rail. It was something that clamped to the dovetail and ran most of the length of it, but was very low profile; also it was secured via a few hex nuts.

Does anyone recognize this and know where to get one of these? It did not seem to be a custom item for the GK 1

I wasn't the one who posted the image, but I'm also reviewing / searching for a dovetail to pic rail adapter. You might consider trying this one, but do know that is from an overseas rep: ( https://eaglevisioncam.com/shop/sco...-picatinny-weaver-13mm-to-22mm-rail-converter ). This iteration comes in various lengths as well.

I'm considering it, but need to get more details from the dealer to insure that my UTG pic riser will actually fit into the grooves of the pic rail "converter". I tried this iteration: ( https://www.amazon.com/gp/product/B08XXMSZ7Z/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1 ), but the UTG riser rails were too wide for the slots and therefore was unable to secure it onto the dovetail. I don't want to make the same mistake again and be stuck with yet another unused adapter.

I like the first one I mentioned above, due to it having an option to use installed screws to cinch it onto the dovetail. Whereas the second converter rail is pinched or clamped on the dovetail externally, from whatever you're using mount on the pic rail section. Maybe later I'll take some images and post them, to better illustrate this. Hope this helps some...
 
The Eagle Vision adapter is very well made (much better indeed than the cheaper alternatives).

View attachment 464279
Please, show the whole thing. 🥹
Which Eagle Vision scope you have?

Btw, I saw these muzzle breaks. I wonder if would fit on GK1. 😄

 
Please, show the whole thing. 🥹
Which Eagle Vision scope you have?

It’s actually just the scope rings and picatinny adapter that are from Eagle Vision. The scope is a Pulsar Thermion 2 XP50 Pro (thermal, laser range finder an ballistics calculator in one).

My GK1 changes form from time to time :D

From reddot:
IMG_3782.jpeg


To carbine:
IMG_3890.jpeg


Sticking with the Buck-rail grip/rail adapter now:
IMG_4382.jpeg


I need to take a picture in it’s final form, with the nice transportation hard case :)