This morning, I took a few shots at this cast iron frying pan. with my .30 cal RAW at 55 yards. I saw a 1 inch hole in the pan, then took a few more shots till the rest of the bottom was gone.
How much power does the RAW HM1000x have?
- Thread starter jps2486
- Start date
look at aeac videos it showa fps and foot pounds... i have the same rifle... cant test till the pro chrono arrives,, any day now,,Steves vids show i believe shows the30 caliber shooting at 77 foot pounds
Upvote 0
90? That means your gun is shooting 950 fps with 44.75 gr pellets. Awesome. Mine shoots 75 fpe.
Upvote 0
Cast iron is very brittle. 40fpe is probably enough to knock a hole in it. Sorry to rain on your parade.
Upvote 0
He probably cranked up the regulator a little. You cant adjust RAWs a lot with the hammer adjustment, at least not this much from stock setting.
@jps always fun to something else than target cards from time to time
Shows that your backstop should be sufficiently thick
@jps always fun to something else than target cards from time to time
Shows that your backstop should be sufficiently thick Upvote 0
Yes, I tried increasing the hammer spring tension, but best I could get was around 878 fps."broekzwans"He probably cranked up the regulator a little. You cant adjust RAWs a lot with the hammer adjustment, at least not this much from stock setting.
@jps always fun to something else than target cards from time to time
Upvote 0
If it shoots great I would just leave it at the settings it is right now. If you like to experiment you can adjust it to get more speed. Most shooters out here (Netherlands and Belgium) use velocities of about 855 to 870 fps with the 44 grains
Is it possible to place your picture of your first post with a different image hoster? It display an error at my screen (could be just my PC)
Is it possible to place your picture of your first post with a different image hoster?
It display an error at my screen (could be just my PC)Upvote 0
broekzwansIf it shoots great I would just leave it at the settings it is right now. If you like to experiment you can adjust it to get more speed. Most shooters out here (Netherlands and Belgium) use velocities of about 855 to 870 fps with the 44 grains
Is it possible to place your picture of your first post with a different image hoster?
Upvote 0
I wouldn't change a thing if I were you Or make sure you save the current settings very well, would be a waste to loose this accuracy
Thanks for the picture nice plinking material
Or make sure you save the current settings very well, would be a waste to loose this accuracyThanks for the picture
nice plinking materialUpvote 0
Whow!!! If I could do could do that I would not change anything. Achieving less than 1 moa does not happen too often. Well done.
Upvote 0
