How many fill you think?

Realizing I'm comparing grapefruits to oranges, I have a 700cc bottle that I use the edgun "Peazy" on to fill/top off a 580cc bottle. It never FILLS the 580cc but I get a couple of decent partial fills and maybe a couple more small partial fills. Enough to keep you going but don't expect it to fill it up.

I expect you will get something similar, maybe one good top off to full and then maybe a partial fill or two. Plenty for hunting, unless you are working flocks of pigeons/sparrows or something. Hopefully someone that knows the math can chime in and give you a better estimate.

I like the ease of packing a bottle, but I'm seriously considering one of Joe's guppy tanks for running and gunning.
 
  • Like
Reactions: Dr. Kralenstein
would it get 50 with a 680cc bottle on the gun itself? im sure, just be careful about waste on connection and bleeds ... as a test you could fill the bottle to '230', tether the bottle to the gun and open the valve, then shoot it down ..
It's a carbine I'm finishing up with a tube no bottle. I'm just thinking an extra bottle with a foster right off the fill valve so no whip to worry about. Keep it in my pack. Not like I'd be needing 50 shots on a hunting trip, but I get bored sometimes and will shoot random crap whilst waiting on Mr squirrel to show up.
 
Either I'm doing that wrong or it says fill only 0.2 times from a 2200 psi refill to 3400 psi. That doesn't seem right.

Even saying my 3L 300 bar bottle will only fill 2 times and I know it'll do plenty more than that.
i can't vouch for their calculator. here is another one.
as soon as you start filling, your source pressure drops quickly from a small bottle ime. i have a guppy.
if i fill at 2500 psi, i get 20ish fills
if i fill at 2000 psi, i get ~10.
some shooters that have high fill pressures will cascade bottles, so they use one bottle up to moderate pressure, and a 2nd bottle to top off the gun.
 
Last edited: