Homemade target for pellets (and ocasionally slugs on paper)

Homemade adjustable (height and rotation), demountable and portable shooting target for easy transportation. Made of scrap metals.
Paper 17cm X 17cm to be used with or without articulated steel plate for a sort of backstop. I guess it will endure a 60ft-lb power. 
Interchangeable rotating metal targets in MOA multiples converted to metrics
OD 14mm: 50m
OD 28mm: 100m
OD 42mm: 150m

1582051171_9022213055e4c2f63193af7.80742975_Target 1.JPG
1582051189_259212065e4c2f750faaf4.76512955_Target 2.JPG
1582051202_8587703325e4c2f82e60d33.77019661_Target 3.JPG
1582051215_12117949345e4c2f8f99e806.18544717_Target 50m.JPG
1582051232_4188274785e4c2fa0451132.53550716_Target 100m.JPG
1582051249_21293972385e4c2fb1765de9.00090359_Target 150m.JPG
1582051265_20674650795e4c2fc1778b66.00373259_Target assembly.JPG

 
Nicely done!

I like the options. 

How do you control ricochets?

Thank you for sharing

Thanks. Well, this is gonna be used at the shooting range. Hopefully, when the articulated backstop is hitted it should absorb the majority of the pellet energy. No intention to use it closer, like 25m or less. Not worthwile to run the risk of ricochets. 
 
Very nice. If you were to worry about ricochets you could put an angle on the rear plate to make the pellets go towards the ground.

That's why the backstop is articulated with hinges. I hope to have that angle when I hit it. The plate is almost 4mm and somewhat heavy for shooting pellets 50m and beyond. The backstop will be need when using against something I don't want to hit when practicing like a wall for instance.