Home grown moderator

that’s a great idea. Let me run with this...


Large volume: the skipper

skinny version: the gilligan

beautufully finished: the Ginger

super expensive? The Mr. Howle

with plaid and denim hydrodip: The Maryanne

Precision engineered: The Professor


Does that cover it?




You left our Ms Howle? How dare you. I shall file a formal complaint to the administrators of this forum.


 
1593538397_12343860225efb775def9a66.17184675.jpeg
1593538398_13179193835efb775e205970.02008875.jpeg
1593538398_2794823975efb775e38d662.60265036.jpeg
Well I made a mark 2 prototype with about 5 times of the volume of that last one. Overkill no doubt. I will post some pictures of the internals here in a little while. I I’m sure this is nothing like the noise suppression of a professional model, but this high-volume moderator absolutely shushes this thing even up at around 50 FPE. I know this is cliché but I literally thought something was wrong with the air gun because it was so quiet. It’s very strange seeing things smashed to smithereens at the target with very little sound of a blast at the gun end!



So of course this thing really isn’t practical, the wood will split as it dries, it doesn’t stay centered for multiple shots, etc.. But if I’m in my garage I want to take a couple of high power shots I can just slide this thing on the muzzle, fire a few high-powered shots, then dial it back down for regular garage gallery shooting without the suppressor. 
 
Internals... in case you need a chuckle! While this may seem like a joke, and on a certain level it is, when it comes down to it I can shoot 50 FPE shots in my garage without anybody noticing and it didn’t cost me more than just about an hour or two of time. 

This model is “The Skipper” of course: :)

First photo is where the muzzle goes. There will be additional splints at the 10:00 and 2:00 positions In the end

1593543733_5656821655efb8c3568b8d6.03733241.jpeg



this pic shows the vents in the small inner tube and I guess what might qualify as bamboo baffles at the front and back

1593543733_6777161055efb8c35975fd5.64279294.jpeg





since this is fresh bamboo and not seasoned, I am using the hose clamps to prevent splitting. Bamboo picked at the right age and dried properly is pretty durable though. If I wanted to make one of these to last, I would not be starting with green bamboo.


i wrapped felt around the vented area of the center tube

1593543733_18563919465efb8c35a94da4.54304303.jpeg



view down the large outer tube, there is a ring of bamboo down at the end to keep the tube centered 

1593544040_11956408235efb8d68f0a877.78854316.jpeg


Here is the front end and a view down the middle just because why not Notice the splits which I will fill with something or just ignore.

1593543733_15660952905efb8c35ddd1b7.03680894.jpeg



 
Thanks. YouTube channel... that’s a funny thought.



Bamboo is actually an amazing material. If someone had some decent craftsmanship skills which I obviously lack they could make amazing things out of it. Interesting that depending on how old it is when you pick it, the material is quite different. A one month old cane is like styrofoam, 3 months like very hard foam rubber or something. A one year old bamboo section will be pretty is pliable and soft and easy to cut. Timber bamboo (what I have) that’s been allowed to grow for six years doesn’t get any bigger than when it was 6 months (unlike trees) but it becomes very dense hard and much more challenging to cut, more like hardwood in some ways. 


The stuff is a plague and I assume it will someday take over all of the ecosystems around where I live, but in the meanwhile it’s pretty entertaining. Those canes grow at a rate of 1 to 3 feet per day when they emerge. It’s like an huge asparagus patch... these spears just rocket up and form a canopy, then just sit there not really growing but just getting denser.