Need help removing stuck barrel....I already removed grip screw and barrel won't come off.I have Saber tac top rail installed, was maybe wondering that some tops rail screw might be to tight. But don't want to be messing around
FX Help! Removing Fx M4 barrel
- Thread starter Alejandro91
- Start date
You have to release the 6mm screw in the rear barrel housing. The M3s also had a twin barrel clamp at the front which needs releasing, but I don't think the M4 has this.
Upvote 0
I’ve pulled the barrel out of my M3 without loosening those front “clamp” screws . Maybe the Saber top rail caused some deformation in the frame by incorrect installation. You’re supposed to tighten the screws from the middle working towards the ends.
Upvote 0
I will lossen up the saber tactical rail screws and install again I'm like 90% sure it's that.
Upvote 0
Barrel stick stuck, I have already remover saber tactical rail and screw and still barrel doesn't come put
Upvote 0
Maybe put the gun upside down with the barrel in a vice WITH PADDED OR SOFT JAWS and with a small piece of wood, tap straight back on the front. Any other mods you did? like glue a carbon fiber barrel liner on?
Upvote 0
I already did everything is just the barrel shroud I already removed barrel and carbon fiber liner, I never use locktite
Upvote 0