Help: Remove & Install TX200 TX200 Air Arms Lever Axis Pin Part No. TX266

[Deleted member 49222]

If I can do this myself, like to do it right the first time. Some pins need to be removed in only one direction. Please let me know how and what is needed to remove and replace this pin without buggering up the finish. This is the pin that holds the cocking lever to the receiver. I need to replace the entire lever. Please feel free to PM and Thank You in advance.

 

[Hateful McNasty]

Here at 3 min mark it just taps out 4mm drift

 

[AirShot]

Yep, just tap ut thru either side with a drift pin and a small hammer. To put it back in, just start it then tap it thru with the arm in position.

 

[1BadDart]

Use a brass drift if you have it.