Heliboard Installation

[Skip-in-WV]

Lost my installation files. Anybody a copy that can send me?

 

[rthor]

Here is what I have.

View attachment Heliboard user manual v1_DRAFT1.docx

 

[Motorhead]

Into what model rifle ?

 

[whyzee]

If it’s a RedWolf, just watch the YT video by Sub12 airgunner. He explains nicely how to disassemble and reassemble the RW.
Remove factory board while disassembling the trigger block, install heliboard upon reassembly. Then turn it on. Easy really. Take your time

 

[Skip-in-WV]

Finally got it to print. 27 pages. Wow. Thanks

 

[SDstephan]

Followed instructions by Sub-12, though the wire layout differed slightly between stock and heliboard. after I powered up I realized that the trigger is always hot unless the bolt is open. Now waiting to let the capacitors discharge so I can double check the connections. Anyone have any other ideas of what I should look for?

TIA

 

[whyzee]

It sounds like all is proper. The Heliboard differs slightly in the operation of the trigger, safety switch and such.

 

[Arzrover]

If it turns off when the safety is switched to off and/or when the bolt is open, It's normal.... always hot when on... that's why it's VERY important to turn it off when not shooting... will kill batteries to unrecoverable.
Bob

 

[SDstephan]

Thank you both - was terribly worried - need to adjust my handling of the rifle.
The turning off has been stressed quite a bit in everything I've read. Luckily the larger capacity RC batteries fit, if snugly, in both the stock and PRS chassis so I might buy myself a few more hours.