Anyone know where I can get new piston seals from. Or if anyone has a broke. One where there always break at the motor. Mine is leaking where the piston moves in n out of the housing.
Hatsan Tachair spark parts
- Thread starter robertnadia84
- Start date
To me, the Hatsan Spark looks like a TUXING. Give the AliExpress site, the TUXING Offical Store ( https://tuxing.aliexpress.com/store...=a2g0o.store_pc_home.pcShopHead_8147005.1_8_0 ) a look and you might find the parts you are looking for. Your compressor issues may be nothing more than dirty check valves. Maybe pull off the HPA lines and clean those check valves. Brothers In Air has a good video on maintenance ( ). Pulling these little compressors apart is easier than it initially looks.
Upvote 0
Yeah I know it’s not the check valves. When I fill it to 3k shut it down spray it with soapy water can see the bubbles where the piston moves in n out. When the power inverter is turned down n compressor is slower u can hear the air blowing out that same spot
Upvote 0
Robert,
Been following your Hatsan compressor story, now I see you want to buy a cheap compressor. Not sure if this will help, but I'll share anyway. The Yong Heng HPA compressor enjoys a popular following on this forum. Pricewise, it's reasonable and, if properly cared for, can last years. Repair parts are available, affordable and easy to install. Here's my year-old fill station set-up. Paid $270 for compressor, $60 for gold filter and $125 for copper-colored coalescing water separator. Best of Luck, WM
Been following your Hatsan compressor story, now I see you want to buy a cheap compressor. Not sure if this will help, but I'll share anyway. The Yong Heng HPA compressor enjoys a popular following on this forum. Pricewise, it's reasonable and, if properly cared for, can last years. Repair parts are available, affordable and easy to install. Here's my year-old fill station set-up. Paid $270 for compressor, $60 for gold filter and $125 for copper-colored coalescing water separator. Best of Luck, WM
Upvote 0
It looks like a super nice set up. Yeah I posted the ad at same time still trying to possibly figure out a parts deal for it. I would even try swapping some seals with o rings but not sure they would hold up to the force of that piston but when the leak gets worse if have not figured anything by then that’s what am going for
Upvote 0
Robert,
There's a mountain of information in the archives, I'd start a search with "Yong Heng" and "best-homepro." Lots of folks here ready and able to help with questions, too. That's a cheapo 10" box fan behind the compressor and the green bottles are ice-filled, just some tricks and tips others have shared for keeping the compressor cool. Hate to admit it but I get almost as much a kick out of using this fill station as I do shooting my PCPs. Pretty weird, WM
There's a mountain of information in the archives, I'd start a search with "Yong Heng" and "best-homepro." Lots of folks here ready and able to help with questions, too. That's a cheapo 10" box fan behind the compressor and the green bottles are ice-filled, just some tricks and tips others have shared for keeping the compressor cool. Hate to admit it but I get almost as much a kick out of using this fill station as I do shooting my PCPs. Pretty weird, WM
Upvote 0