After pulling the hammer, spring and adjusting out to fix a hammer spring adjusting screw from moving I put the rifle back together and will not cock.
Help please!
Help please!
Ok this happed on my Quattro trigger on my Mdl 95. I can’t remember exactly which part but one of the sears came out of position when you put it back together. So just pull the trigger assy one more time and reinstall it making sure all trigger parts stay engaged when you drop all the pins in. You may need to make slave pins to help keep everything in place
Glad You got it straightened out.
Aside from that minor issue,how do you rate the Nova Star? ...and which caliber did you select?
Thanks!
Mike
Glad You got it straightened out.
Aside from that minor issue,how do you rate the Nova Star? ...and which caliber did you select?
Thanks!
Mike
That " minor issue" is just the tip of the iceberg. I have a .22 caliber not by selection, I wanted a .25 but none in stock.
The retailer had a 20% off so I grabbed the .22.
Rated 2 out of 5..... the stock is very nice and it has a carbon fiber bottle
everything else is poor quality and prone to failing.
This is my first pcp. The appearance was alluring, the performance is poor.
The screw heads are very soft and prone to stripping if you look at it too hard.
The hammer screw adjuster will not hold and the factory's remedy was to take a hammer and deform the threads
which did not work so the fps are all over the place, the plastic stop for the hammer spring is being gouged by the hammer spring which probably
contributes to the fps being all over the place.
Thanks for asking
Adjust the trigger screw out a bit. Mine came the same way
But after adjust has been good for 3 years.