Tuning Hatsan Mod 95 P/N 774 screw

[funkermunker]

Hello, 

Anyone know what the metric specs are for the (P/N774) retaining screw...It's the small screw on the forward end of the stock that keeps the bushings from backing out of each other. I stripped it and want to replace it.

Thanks!

 

[4888blues]

Take the nut to ace hardware they have metric studs & metric sockets you can see what the nut screws on to. 

 

[survivor45]

It may be an M4.
I just re taped the hole to 6-32 

Then replaced the screw with a stainless steel Flathead 6-32 x 1/2” 

.

 

[funkermunker]

Thanks folks! I ended up tapping it to 6-32 as well. I appreciate all the feedback.

 

[xsarfc9x]

http://anotherairgunblog.blogspot.com/2014/03/fixing-broken-stock-screw-in-webley.html