Hatsan Jett the guns shooting action seems to work.I hear the hammer spring go when trigger pulled but no air.How can I fix

[McMullen]

I have Hatsam Jett for some reason the gun seems to be working exept no air is being let loose when trigger pulled why how do I fix.I believe its bad valve but what do u think

 

[PasadenaMike]

I have Hatsam Jett for some reason the gun seems to be working exept no air is being let loose when trigger pulled why how do I fix.I believe its bad valve but what do u think

Sounds about right

 

[daddypaddy]

i think hatsan needs better QC

 

[daddypaddy]

and better customer support.

 

[Feinwerk]

Check the bore to make sure you haven't double loaded and jammed pellets in the barrel. If so, tap them out with a wooden dowel.

 

[McMullen]

Any info on how hard is it to switch out the valve on hatsan jett 1 it stopped sending air at trigger pull and hammer spring and allmis good.

 

[keesbo]

I had already two broken valvestems with my Invader in 2 years.

 

[McMullen]

I had already two broken valvestems with my Invader in 2 years.

so the valve stem inside the the gun broke 2 times what did you do.

 

[McMullen]

I gotanother gun so I i wanna switch the valves out wondering my success chances easy or hard

 

[keesbo]

so the valve stem inside the the gun broke 2 times what did you do.

I bought 5 new valve stems the first time, so I had spares.
With the Invader you can unscrew the aircilinder wich also contains the valve so you can easily repair it.
Most Hatsans are quit easy to fix.