anyone know if they make a moderator to go on the Hatsan Hercules that would take the place of the shroud end cap?
Hatsan Hercules Moderator???
- Thread starter Galiher05
- Start date
Deja,
it it has a 1/2 x 20 unf under the shroud but I would like to keep the shroud on there.
it it has a 1/2 x 20 unf under the shroud but I would like to keep the shroud on there.
Upvote 0
Dodge3500....I have...the only way I have been told so far to quiet it down is to take the QE baffle system out....cut down the shroud to where it is about the same length of the barrel to where now you can just attach the LDC to the threaded barrel and that's it....i just would like to keep the shroud intact
Upvote 0
Neil could custom make a LDC that connects to the shroud. I'm thinking it would make the gun a lot longer though. On a couple of my Hatsan QE guns I just removed the shroud and put on a screw on LDC to the end of the barrel, You could try to reduce the hammer in order to dial down the power. It should quieten the gun down some but not sure it will make it backyard friendly.
Upvote 0
Neil won't make one. I contacted him about a month ago and he said he couldn't get it to line up properly. Bwalton suggested cutting down the shroud and adding a regular 1/2 x 20 LDC and it would keep the length about the same.
Upvote 0
Calling all DIY'ers! Please come up with a mod to the existing Hatsan shroud to quiet down the report.
Upvote 0