Hatsan Gladius Part Needed - “Repair Pics Updated”

[tdmag4life]

Part 2806 - is not available via HatsanUSA . Need one made or suggestions on how to fix - thanks

Thanks Don’s Welding & Fab Wauconda, IL 60084

 

[john8]

what's wrong with your existing one, looks bomb proof to me. I've lost pieces but have never worn out anything yet.

 

[Odoyle]

Can't see the pictures.

 

[tdmag4life]

Not sure of name - it’s connected to the cocking lever which cocks the hammer. 

 

[Odoyle]

Maybe a local machine shop can copy it for you. Maybe even fix it for you. 

Or local iron works or metal welding and fabrication shop.

I got lots of things welded and fabricated and improvised at these local mom and pops shops. Sometimes even free if simple.

 

[shoot44]

del

 

[tdmag4life]

Shoot44 thanks - they were the first I reached out to. I used their exploded diagram to find part number. They didn’t offer up that suggestion - just replied they didn’t cary that part.

 

[john8]

I owe you an apology, karma I just had mine fail in the exact same spot. I'm going to get mine welded. How has your weld held up?

 

[tdmag4life]

Find a good Tig welder - cost me $20 (he had it for 4 days and sort of got to it when he got to it). I purchased a few M3 screws which I stripped one removing - reassembled this evening with a new barrel o-ring. So far about 40 -50 slugs shot through re-tuned to 905 fps and I suspect as strong as new if not stronger. I now cary a nylon cleaning rod in my jeep in case of any sort of jam. Good luck