Hatsan flash qe

[d]

I'm getting ready to order the hatsan flash qe from airgun depo and a hand pump from Amazon. Do I need any other fittings to fill?? Thank you in advance 

 

[wildcj5]

Not sure about connecting to the pump but the Hatsan probes do not come with the quick release foster. So if you plan on hooking it to a yoke you may need one. The other option would be a probe from Huma with the quick fill already built in.

 

[BigTinBoat]

I'm getting ready to order the hatsan flash qe from airgun depo and a hand pump from Amazon. Do I need any other fittings to fill?? Thank you in advance

If the hand pump you are getting has a female 1/8"bspp fitting you will need nothing else. If it has a female foster (that attaches to pump with something other then 1/8" bspp) then you will need the below fitting to adapt the Hatsan probe to the female foster

https://www.airgundepot.com/air-venturi-male-quick-disconnect-3550.html

 

[d]

https://www.amazon.com/Hiram-Pressure-Filling-Stirrup-Stainless/dp/B07VB7LF24.



Here's the pump I would like to order.

 

[Yo]

https://www.amazon.com/Hiram-Pressure-Filling-Stirrup-Stainless/dp/B07VB7LF24.



Here's the pump I would like to order.

Aliexpress sells that exact same pump for $39.50. YO!