N/A Hatsan at44-10 fill probe delete?

[Bowhunterwa87]

Has anyone done this before? I just filled my at44-10 .25 cal and it started to leak from where the fill probe goes into the tank.. i know I had put a male foster fitting on my sam yang 909s and deleted the fill probe for that airgun. Is it possible to do this to the hatsan? Anyone done this or know if its possible please let me know. Ive never had this airgun apart in the 5 years ive owned it. It's been a great air rifle and finally developed this leak. I only have the probe on this airgun out of all my lineup and would rather have a male foster if at all possible.

 

[JaceSpace1369]

Has anyone done this before? I just filled my at44-10 .25 cal and it started to leak from where the fill probe goes into the tank.. i know I had put a male foster fitting on my sam yang 909s and deleted the fill probe for that airgun. Is it possible to do this to the hatsan? Anyone done this or know if its possible please let me know. Ive never had this airgun apart in the 5 years ive owned it. It's been a great air rifle and finally developed this leak. I only have the probe on this airgun out of all my lineup and would rather have a male foster if at all possible.

@techna Machined a foster fill into his rifle, not sure how difficult it would be though.

 

[Gerry52]

Here's the link where @techna mentioned what you're looking to do (6th picture down). Talk to him.

Thread '.30 cal AGT Vulcan 3 (Wood stock) 500mm with AGT Moderator' https://www.airgunnation.com/thread...-wood-stock-500mm-with-agt-moderator.1338394/

 

[techna]

The fill apparatuses I made for my Vulcan 3 and Uragan 2 are basically stainless steel fill probes that have a retainer on the backside which fixes them in place. They work because these AGT guns have a hole that goes all the way through the air bottle receiver block so that the factory probe can be inserted from either side. I’m unfamiliar with the Hatsan and don’t know if the probe inserts into a blind hole or through hole.