I Have a Hatsan 95 Vortex QE any help would be appreciated Cocked it load a pellet took it off safety and nothing the trigger seems to be Froze ....#$$^&**(**((&&**&&&
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Hatsan 95 vortex Trigger froze Help
- Thread starter markfina
- Start date
I don’t know if this will help as I have never owed a Hatsan. If it has an adjustable staged trigger point the muzzle into the ground for safety, adjust the trigger stage screw until it fires. If it doesn’t fire remember where the trigger was set and put it back there and call a Hatsan dealer.
Good luck
Gary
Good luck
Gary
Upvote 0
Still froze tired adjusting the 2 screws that are recommended with no success .I sent a e mail to Hatsan about a week ago and still haven't heard from them strange.
Upvote 0
That’s a bummer. Did you remove both screws all together and try lightly tapping the trigger. Or are there any gun shops close by where you can safely take it to be looked at.
Good luck.
Good luck.
Upvote 0
I have regularly taken apart my Hatsan, I have had this issue happen only once, by taking apart and luvbing/ re-assembling I managed to fix it, but it is a fairly complicated trigger with lots of moving parts fortunately there are many much smarter than me:
Watch these :
Just needs a spring compressor when disassembling, otherwise can be a handful to get pins back in...
Hope this helps
Watch these :
Just needs a spring compressor when disassembling, otherwise can be a handful to get pins back in...
Hope this helps
Upvote 0
Yes I have been watching Mike Steppings video he is very good at explaining how the trigger works and how to disassemble it and reassemble it.Going to to try and rebuild the trigger this weekend let everybody know how it turns hopefully I don't fu it up :-o
Upvote 0
Update I watched all four of Mike's video's and tuned my trigger following his instruction wow what a difference still not as good as my Diana with the T06 but it was a huge improvement :yes: I highly recommend watching Mike's Video's if you own a Hatsan with a Quartto Trigger and want to get the best out of your Trigger..
Upvote 0
Watch this Video series By Mike Steppings I did this to my Hatsan 95 which is almost Identical to your Hatsan 125 he will explain in his video's how to tune and adjust your trigger Mike Does a very good job at explaining ,one of the best how to video's on you tube just take your time you can do this I did and I'm a idiot LOL GOOD LUCK !!
Upvote 0