My Hatsan Carnivore is leaking, loses about 500 psi per day, please help.
Suggestions?
Suggestions?
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Hatsan 30 Cal
- Thread starter dark1961
- Start date
I would remove the air cylinder and listen to see if you can hear if its coming from the valve or fill end of the cylinder then replace the o-rings
Upvote 0
More than likely (99%) it’s leaking past the o ring in the fill port. You can check this by spraying foam shaving cream in/on the fill port. Watch for bubbles.
If this is the point of the leaking, you will need to do one of two things:
1. remove the fill port from the air tube ONCE THE TUBE IS EMPTY. They are on tight. Don’t even try to attempt to remove with the fill probe. You’ll break it/bend it.
2. Send the air tube to Hatsan and have them repair it.
If this is the point of the leaking, you will need to do one of two things:
1. remove the fill port from the air tube ONCE THE TUBE IS EMPTY. They are on tight. Don’t even try to attempt to remove with the fill probe. You’ll break it/bend it.
2. Send the air tube to Hatsan and have them repair it.
Upvote 0
Dark1961, Air Velocity sport, did a good video on you tube. On your problem and how the fix it.Dave
Upvote 0
Degassing tool doesn't fit, I have already contacted Hatsan USA, but haven't heard back.
Can I dry-fire until it's empty to get at internals of air cylinder?
Can I dry-fire until it's empty to get at internals of air cylinder?
Upvote 0