Has anyone ordered from the RTI shop

Jump to latest Follow Reply
J

Jasonmc

Member
Mar 5, 2018
878
791
IN, United States
https://www.rtiarms.shop/

After about a year my reg started to creep pretty fast. Reg is set to 140 bar, after I shoot I can watch it fly up to 160 bar. ( I have never adjusted it so I know messing with it didn't cause the issue) Going buy some of your guys experience it was just a matter of time before mine started having the creep issue. I see the RTI shop offers the non adjustable reg pre set to 145 bar. I figured that would be close enough and read the non adjustable reg is a bit better. 

Just wondering if anyone has ordered from them and how long did it take to get you order to the US
 
Good to go , I ordered a 177 barrel and kit for my 25 caliber Prophet, They responded very well.

Mike
Click to expand...

Hi Mike, let me know how the .177 works - if it shoots too hot. I’m thinking about getting a .177 barrel kit for my RTI PP .22 LR, but wondered if the hammer spring would be too strong for the .177.
Click to expand...

I just got one what do you want to know? Reg set at lowest pressure I'm tuned at 920fps with 10.3gr. Maxed around 970fps. You can back the HS out further also.
 
Upvote 0
Good to go , I ordered a 177 barrel and kit for my 25 caliber Prophet, They responded very well.

Mike
Click to expand...

Hi Mike, let me know how the .177 works - if it shoots too hot. I’m thinking about getting a .177 barrel kit for my RTI PP .22 LR, but wondered if the hammer spring would be too strong for the .177.
Click to expand...

I just got one what do you want to know? Reg set at lowest pressure I'm tuned at 920fps with 10.3gr. Maxed around 970fps. You can back the HS out further also.
Click to expand...

THanks everyone.. I'll be ordering a new non adjustable reg from them tonight..

As barrel swap kits go.. I'm not sure RTI does this but I'm thinking they might.... 

When I ordered my FX DL compact I ordered it in 177... later i made my own 22 (380mm) and 25 (420mm) barrel kit. But when I swapped to a 22 or even the 25 it wouldn't tune up to much over 830fps. come to find out FX uses different hammer weight for a 177cal..! After I made my own on the lathe now the 22 with 18gr will max out at 890fps... I haven't messed with it in 25 much so I dont have any info.

Anyway RTI just may use different hammer weights. (Again I don't know, just throwing it out there as a possibility) So going from 22 to 177 may not be an issue...its when you start with a 177 and go a larger cal could be an issue..
 
Upvote 0
That 177 barrel can really zip 177 JSB 10 gr pellets , I only adjust hammer spring with going from 25 to 177 wanted to make it easy going back in forth, Regulator set at 135 bar , I shoot my 177 10 gr pellets at 940 FPS and above,, I shoot the 25 caliber 34 gr pellets at 900 FPS they are still accurate up to 980 FPS but just to much noise for me, Hammer spring adjustment only.. Cinder blocks as a back stop and wood in front of blocks, All Kinds of paper targets , Cans , Spinners , and anything I come across to shoot at, Golf balls , Spoons , Homemade spinners , 22 spent shells, shot gun shells glued to 2X4, old sprinklers .

Mike 
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu