Gx cs3 compressor

[Ohioairgunner]

So I went to pump my gun and I went to connect the cables one was connected one wasn’t the one that wasn’t hit the bottom of the compressor by on/off switch and made a tiny spark so I shrug it off and connect the other cable and the compressor turns on but the red off button doesn’t come on and I’ll try to push start and it won’t even pump so it’ll turn on but no off light work start light don’t work and buttons doesn’t work someone please help me out

 

[FLgunner]

Sounds like you may have blown a fuse! You may need to open it up and look inside to see if you can see any obvious signs of damage or a blown fuse.

 

[Ohioairgunner]

Okay yea my power switch button is wiggling around now if I try to turn it on or off it slides back and forth

 

[Scotty1]

Pics?

 

[Ohioairgunner]

 

[Trucker3573]

So the fans come on but the pump motor won’t kick on ?? This model was known to have circuit board problems right out of the box. If I remember correctly that was the tell tale symptom. Good news if you did take out the circuit board they are readily available. Target forge in cali carries a bunch of gx parts.

GX compressor parts

GX parts are HERE! Exciting times!

targetforge.net

I would contact bill the owner and explain what is going on and he can direct you to what you need. He knows these compressors really well.

 

[Scotty1]

It seems you still have power, so not a power supply issue. I don’t know if there is any other protections on the unit itself, you may have fried something on the circuit board. I would contact the manufacturer, they may send you repair parts. Perhaps someone with this compressor will chime in…

 

[Rowdy_1]

Target Forge is carrying an updated board & is making adapters to make them fit.