GMI SLUG TESTING ALL CALIBERS

[jwrabbit123]

HI THIS WILL BE MY NEW THREAD FOR TESTING THE GMI SLUGS , I WILL BE MAKING AND POSTING ALL CALIBERS AND DIFFERENT WEIGHTS ,
I just got caMERA A FEW DAYS AGO AND i NEED TO GET USED TO IT AS IT IS A LEARNING , Ialso like to add these groups are from a wobbly plastic table I got , I do plan on getting a sturdy setup soon , so please take this into account , also read title of footage as some may be off hand or with a sling , if not stated then it is off table

OK first up fx king 357 m I found this gun will not shoot slugs under 101 grain Not sure why it is a new gun also I did order a slug probe and spring from huma , not much footage as the gun started leaking threw barrel *calve started leaking 2nd time )

View attachment 567417

 

[jwrabbit123]

fx impact 22 MK2 caliber 31 grain gmi flat base 930fps

 

[jwrabbit123]

fx lelya 25 I had to fix for a friend here which was leaking , replaced all orings cleaned and tuned , here is a groupabout 332 shots off a shooting stick with gmi 28 grain 35 caliber slugs ,

 

[jwrabbit123]

ok here is friend from here shooting a RTI Mora357 700mm barrel

this is his rti profit2 only 1 group and his valve broke 22 caliber 31 grain

 

[steve123]

That's pretty bad for 10 yards, JK , but at what distance were you shooting?

I used to shoot off a couple crappy tables until I found one at a 2nd hand store that weighed 150 pounds. It's very stoutly built so I put another 75 pounds of weight on it and since it's set on concrete it super stable to shoot of. It helps reduce flyers for sure.

With the other tables/benchrests I found myself relaxing as I kept shooting which caused me to lean against the tables more resulting in inconsistency. This inconsistency can be viewed through the scope by watching where the reticle lands after the shot is taken. Doesn't land in the same place means "not good".