Huben GK1 Grip wood burning and polyurethane.

Pulled out the old wood burner and giving all my wood grips make overs.

PXL_20250613_151703273.jpg


PXL_20250613_151759152.jpg
 
Gorgeous!!

What moderator do you have there? And what power are you shooting - and does the moderator work well? I'm looking for a very quiet moderator for the GK1 at about 30 to 40 ft-lbs.
Huma 30mm with 3 section on the pistol comes with 4 sections It's made for .25 and it is quieter. 40ft lbs shouldn't be a problem. I have several 3d prints that work well also. Finding one might be pretty hard though.
 
  • Like
Reactions: Ultralight
Holy Smokes!! Want to intro all three and explain the purpose of each? i.e. Caliber, power setting, etc.

What are the moderators? And which is most effective?

Also, have you tested accuracy of each at longer distances such as 50, 75, or even 100 yards?

Again, a most impressive stable!
 
Holy Smokes!! Want to intro all three and explain the purpose of each? i.e. Caliber, power setting, etc.

What are the moderators? And which is most effective?

Also, have you tested accuracy of each at longer distances such as 50, 75, or even 100 yards?

Again, a most impressive stable!
No long distance backyard only. My shorty .25 shooting 20.06g 580fps shooting pill bottles offhand and cardboard. 177 on the right shooting 9.3 wad cutters 700 fps for sparrow and house finches. My .22 left shooting 21.9g 600 fps for squirrels and starlings.
LDCs .177 and .22 are subscriber designed new 24 x 40 x 196.5 Tesla valve, my shorty LDC Huma 30mm for.25.

PXL_20250615_225002829.jpg